-40%

For NT156FHM-N41 1920*1080 30 pin HDMI EDP screen LCD panel controller board kit

$ 11.52

Availability: 17 in stock
  • All returns accepted: Returns Accepted
  • Compatible Product Line: Universal
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Country/Region of Manufacture: China
  • Compatible Brand: Universal
  • Type: Motherboard
  • Compatible Model: Universal
  • Condition: New
  • Brand: Unbranded
  • Return shipping will be paid by: Buyer
  • Color: Green
  • Voltage: 12 V
  • Item must be returned within: 30 Days
  • MPN: Does Not Apply

    Description

    PLEASE READ THE FOLLOW CAREFULLY BEFORE ORDER THIS KIT
    1. Please make sure your LCD screen can display correctly. This is very important. If the LCD screen itself is displayed incorrectly (as shown below, Black screen, white screen, blue screen, flower screen, etc), our kit will not be able to drive and work. Please do not place orders. (This is the main reason for opening disputes, please pay attention!)
    2. Screen test method: Install the screen on the original laptop or monitor to test whether it displays normally. Or take it to the repair center for testing. The photo below is the normal display screen.
    3. The controller board need to install the firmware program to use. Please select the same model as your screen when ordering. Or send us the photos of the model label and signal port on the back of the screen to help us confirm (As shown below). This will ensure that the firmware program we install are compatible, otherwise the screen may not be driven.
    4. The resolution is determined by the screen parameters, If you concern much about resolution setting, please reconsider before bidding!
    5. DIY need certain professional knowledge. If you have any questions during the operation, please contact us for guidance.
    6. Because we need to choose the right kit for your LCD screen, and the supplier may upgrade or update the product, some accessories may differ from the picture. Hope you can understand.
    7. If your screen model is not on the sales list, please tell us the complete model or send a picture of the model label and we will recommend the right controller board for you. As you know, there are many models and series of LCD panel on the market. Sometimes we can't guarantee full compatibility. Please understand! Thanks.
    >>>Controller Board Introduction:
    This is a great set of easy-reassembling LCD controller kit which is used to turn a bare LCD panel into a desktop/PC monitor.
    (Plug&play, no need soldering)
    This kit is suitable for
    1920x1080
    resolution
    EDP 30-Pin
    signal port
    60Hz
    screen
    Compatible with the following screen model:
    NT156FHM-N31
    NT156FHM-N41
    NT156FHM-N51
    NT156FHM-N61
    NT156FHM-N62
    Come In Standby Mode When Not Input Signal
    Input Power Adapter:
    DC 12V/3A-5A
    (need to buy extra)
    (Screen size exceeds 17 inch, 5A power is recommended)
    DC port: 2.5MM and 5.5MM inner+ outside-
    Video Input: HDMI VGA
    Audio Input: HDMI
    Audio Output: Small speaker (need to buy extra)
    OSD: Brightness Contrast VOL+ VOL- Language And So On
    Language: English French German Spanish Italian And So On
    Board Size: 108mmX55mmX16mm
    Package List:
    1Pcs x EDP controller board
    1Pcs x EDP signal cable
    1Pcs x Keyboard with cable
    Special Note:
    Except to the accessories included in the kit, you will need to prepare the power adapter and HDMI or VGA cable yourself.
    If you need power adapter.
    Please click here to BUY
    If you need controller board protective box.
    Please click here to BUY
    Installation Steps:
    1. Take away the old screen cable from the LCD panel.
    2. Connect the new screen cable to your LCD panel. (Note the connector contact direction)
    3. Connect the controller board to the PC with HDMI or VGA signal cable.
    4. Input power. (Please use the standard LCD screen power supply, other power input may not boot normally)
    5. After all finishing the connecting, please do not rush to power on! No metal contact is allowed when powering on the controller board, otherwise short circuit may occur, which may cause unavailability of the controller board.
    Language Settings:
    1. Use the "MENU" button on the button board to enter the setup menu.
    2. Press the "UP" or "DOWN" key to select the Fourth item "OSD", and then press the "ENTER" key to confirm the selection.
    3. Select the First item and press "ENTER" to enter the language selection.
    4. Press the "UP" or "DOWN" key to select the desired language. Press "ENTER" again to confirm and exit.
    The following reference pictures.
    >>>About Payment
    - We only accept
    Paypal
    , Please make sure you have a valid/confirmed Paypal account before bidding.
    - We appreciate for your prompt payment and look forward to future cooperation.
    - If you can't pay it within 5 days, we view you give up.
    >>>About Shipping
    - Item will be shipped within 1-3 business day as soon as your Payment Verified. (Except holidays or special days)
    - Please make sure your address matches the shipping address before making a payment. Once the item is issued, the address cannot be modified.
    International Buyers Please Note:
    - As a buyer, it is your duty to pay the tax when you make a order from abroad. Our price does not include taxes, VAT, or other hidden  charges.
    - Before consulting/purchasing, please consult the customs office of your country or region to determine these additional charges.
    - If you need it urgent, please contact us for the special delivery with extra postage.
    - The delivery time depends on the customs and postal gervice in your country or region.
    Note:
    In the case of peak shipping or bad weather. Delivery time will be delayed. In addition, In some country or region, delivery time may be longer due to strict customs and slow logistics. Hope you could understand. Thanks!
    >>>About Return
    - If the item received is damaged or defective. Please be sure to provide us with a photo of the damaged or defective item within 2 days. After confirm, we will give replacement or refund.
    - If return is required. Buyer must pay for the all return postage and shipping charges, and return according to the same condition received.
    Note:
    Please contact us via ebay message before returning.
    >>>About Feedback
    - If you are satisfied with our products and services, please leave us positive feedback. It`s very important for us, we also will leave you positive feedback.
    - If you have any dissatisfaction, please don't give us negative or neutral feedback. Please contact us first and give us an opportunity to solve the problem. We hope to solve your problem as soon as possible and make you satisfied. Simple negative feedback can't solve any problem. I think communication is very important for understanding each other.
    - We believe honesty and credibility is the best policy. If you have any questions, please contact us by leaving eBay message. We will 100% solve problem for you.
    >>>END<<<