Microwave sensor switch ceiling mount radar body sensor switch 220V

Description

Microwave sensor switch ceiling mount radar body sensor switch 220V
Parameter:
Voltage: 220-240V 100-130V ～
Frequency: 50 / 60Hz
Installation: indoor, ceiling installation
HF system: 5.8GHz CW radio wave, ISM band
Transmitting power: less than 0.2mW
Load power: 1200W (220-240V)
Detection angle: 360 °
Distance: 1-8m (radius) can be adjusted Meters, which are all within the normal range)
Light control illumination: 2 ~ 2000LUX
Power consumption: nearly 0.9W
Applicable environment: corridor, toilet, living room, corridor, warehouse, garage, etc .;
installation steps:
1. Turn the upper cover counterclockwise and remove it, and open the two screws that fix the middle cover
2. Mark the hole on the wall with drill holes. Pay attention to the lead on the wall.
3. Drill holes and knock the plastic expansion body into the hole
4. Pass the power cord through the base
5. Fix the base in the selected installation position with the mounting screws
6. Connect the power and load wires to the terminals according to the wiring identification
7. Close the middle cover, tighten the screws, and then adjust the rotary knob to set
8. Tighten the cover clockwise
1.Packaging:1PCS
2.Warranty period: 120 days
On Mar-17-20 at 19:03:08 PDT, seller added the following information: