Milbank 200 Amp Ringless Underground Meter Socket base w HORN BYPASS, 4 Jaw

Description

Extremely rare & hard to find ;on back order from manufacture till sometime in 2022
A 200 Amp 4-jaws rated for  underground service.
Catalog Number
U3126-O-KK-BLG
Product Description
4 Terminal Ringless
Plain Top
Horn Bypass 7-8 In Barrel
Lock Ground With Bracket
Provision
UPC
784572241749
Length (IN)
4.5
Width (IN)
13
Height (IN)
15.25
Brand Name
Milbank
Type
Ringless Meter Socket
Application
Meter Socket
Standard
UL Listed;Type 3R
Voltage Rating
600 Volts Alternating Current
Amperage Rating
200 Continuous Ampere
Phase
1 Phase
Frequency Rating
60 Hertz
Size
4.5L x 13W x 15.25H
Number Of Cutouts
0
Cutout Size
No Main Breaker
Cable Entry
Underground with Side
Wireway
Terminal
Lay in
Insulation
Glass Polyester
Mounting
Surface Mount
Enclosure
G90 Galvanized Steel with
Powder Coat Finish
Jaw Quantity
4 Terminal
Bypass Type
Horn Bypass
Number of Meter Positions
1 Position
Equipment Ground
Triplex Ground
Hub Opening
Plain Top
Line Side Wire Range
6 AWG - 350 kcmil
Load Side Wire Range
6 AWG - 350 kcmil
Barrel Lock Provision
7/8 Inch Knockout and Angle
Bracket For Barrel Lock
Provision
Number Of Receptacles
0
U3126-O-KK-BLG
Please consult serving utility for their requirements prior to ordering or installing, as specifications and approvals vary by utility
and may require local electrical inspector approval. All installations must be installed by a licensed electrician and must comply with
all national and local codes, laws and regulations. Milbank reserves the right to make changes in specifications and features shown
without notice or obligation.
Express shipping available otherwise 1 to 5 business days Fed-ex ground
The manufacture sometimes ships two items per carton, so if you purchase a single meter socket it will be shipped in an appropriate
smaller box , however all items are brand new and unused .
This item is available  for local pickup by advanced appointment only, In Cherry Hill NJ 08003 near NJ Rt 70 & I 295 .
Please message us for an appointment at least 1 day prior to pick up.
We do not accept returns directly however there is a 1.5 years warranty
through the manufacturer
Please double check that you order the correct Meter socket for your utility company/area . Any mistaken orders will be charged a
20% restocking fee of total order  plus all shipping fees .
Images are for illustration purposes only and may not be an exact representation of the product
Some meter sockets installations may require additional connectors, hubs ,lugs, blanking plates, that are specific to your particular project.
When necessary, these  are sold separately, and are not provided with the meter sockets unless specifically noted
Connectors:  For single lug connector kit order as extra: K1539 (350 kcmil)
or K1540 (600 kcmil). For twin lug connectors are tine plated. For twin lug connectors: K1350 (350 kcmil). Order two kits to
cover both line and load on sockets not supplied with line connectors