Telescope LEICA Binoviewer + 10x/22 LEICA eyepieces + 1.25" telescope adapter

Description

Listing is for LEICA Binoviewer for Telescope with LEICA 10x/22 eyepieces. These are
from
Leica microscope's head and
permanently adapted
for using in telescope
.
It comes with 2 adapters to use regular 1.25" telescope eyepieces in the binoviewers.
The openings of these adapters are close to 22mm. So, any eyepieces with 22mm or below field stops will work great.
I converted them to use in telescope with necessary adapters and 1.25" nosepiece. It works great with binoviewer friendly telescopes (like cassegrain & maksutov). Other telescopes either needs optical glass path extenders (expensive) or barlows (changes magnifications).
Best would be to use a tele-extenders like Televue Powermate or any telecentric barlows. Or else there are big brand manufacturers that makes optical glass path correctors.
* Comes with integrated 10x Leica microscope high contrast eyepieces (25mm equivalent).
* 1.25" nosepiece adapter to put in a binoviewer friendly telescope.
* 1.25" nosepiece can be removed and it got T2 female thread (which can be adjusted using hex screws). This can be used with Baader T2 prism to decrease the glass path.
* Eyepiece can be pushed in/out to adjust diopter.
* Field stop is razer sharp. Excellent contrast without any false colors.
* Uses pretty high quality beam splitter
* Uses mirrors for redirecting the light to eyepieces
* About 22mm aperture to the telescope side.
* Collimation is good when testing. But it can be easily done through tiny 3 screws in the side of those eyepieces.
* Tested using my Celestron C6 on Jupiter and Saturn and excellent. Due to 22mm field stop in 10x eyepiece (25mm), it got limited FOV. But works exceptionally good for planets, double stats.
* The alignment is tested and looks good. But if you face trouble merging images with regular binoculars, these binoviewers are not recommended.
P.S.
Eyepieces can be swapped with any pair of 30mm base microscope eyepieces. Also
It comes with 2 adapters to use regular 1.25" telescope eyepieces in the binoviewers.
Also need to be careful when using this binoviewer. The eyepieces are not screwed or tightened (as done in normal telescope binoviewers). So, they might fall down if the binoviewer is tilted down improperly. Need to always hold the binoviewer in such a way that the eyepieces are always upside.
Check out my other binoviewer listings.
I am trying to procure some cases for these binoviewers. Once they are available, I will ship in them as
complimentary.
No  returns. No international shipping.
Please checkout my other genuine Zeiss & Leica binoviewer listings for more options.