USB 5V DC Solar Lipoly Lithium Lon Polymer Charger Board MCP73871 3.7V/4.2V

Description

Product Overview
USB 5V DC Solar Lipoly Lithium Lon Polymer Charger Board MCP73871 3.7V/4.2V
Features
Integrated System Load Sharing and Battery
Charge Management
- Simultaneously Power the System and
Charge the Li-Ion Battery
- Voltage Proportional Current Control (VPCC)
ensures system load has priority over Li-Ion
battery charge current
- Low-Loss Power-Path Management with
Ideal Diode Operation
Complete Linear Charge Management Controller
- Integrated Pass Transistors
- Integrated Current Sense
- Integrated Reverse Discharge Protection
- Selectable Input Power Sources: USB Port or
AC-DC Wall Adapter
Preset High Accuracy Charge Voltage Options:
- 4.10V, 4.20V, 4.35V or 4.40V
- ¡À0.5% Regulation Tolerance
Constant Current / Constant Voltage (CC/CV)
Operation with Thermal Regulation
Maximum 1.8A Total Input Current Control
Resistor Programmable Fast Charge Current
Control: 50 mA to 1A
Resistor Programmable Termination Set Point
Selectable USB Input Current Control
- Absolute Maximum: 100 mA (L) / 500 mA (H)
Automatic Recharge
Automatic End-of-Charge Control
Safety Timer With Timer Enable/Disable Control
0.1C Preconditioning for Deeply Depleted Cells
Battery Cell Temperature Monitor
Undervoltage Lockout (UVLO)
Low Battery Status Indicator (LBO)
Power-Good Status Indicator (PG)
Charge Status and Fault Condition Indicators
Numerous Selectable Options Available for a
Variety of Applications:
- Refer to Section 1.0 ¡°Electrical
Characteristics¡± for Selectable Options¡±
- Refer to the ¡°Product Identification
System¡± for Standard Options
Temperature Range: -40¡ãC to +85¡ãC
Packaging: 20-Lead QFN (4 mm x 4 mm)
Applications
GPSs / Navigators
PDAs and Smart Phones
Portable Media Players and MP3 Players
Digital Cameras
Bluetooth Headsets
Portable Medical Devices
Charge Cradles / Docking Stations
Toys
Description
The MCP73871 device is a fully integrated linear
solution for system load sharing and Li-Ion / Li-Polymer
battery charge management with ac-dc wall adapter
and USB port power sources selection. It¡¯s also
capable of autonomous power source selection
between input or battery. Along with its small physical
size, the low number of required external components
makes the device ideally suited for portable
applications.
The MCP73871 device automatically obtains power for
the system load from a single-cell Li-Ion battery or an
input power source (ac-dc wall adapter or USB port).
The MCP73871 device specifically adheres to the
current drawn limits governed by the USB specification.
With an ac-dc wall adapter providing power to the
system, an external resistor sets the magnitude of 1A
maximum charge current while supports up to 1.8A
total current for system load and battery charge
current.
The MCP73871 device employs a constant current /
constant voltage (CC/CV) charge algorithm with
selectable charge termination point. The constant
voltage regulation is fixed with four available options:
4.10V, 4.20V, 4.35V, or 4.40V to accommodate new,
emerging battery charging requirements. The
MCP73871 device also limits the charge current based
on die temperature during high power or high ambient
conditions. This thermal regulation optimizes the
charge cycle time while maintaining device reliability.
The MCP73871 device includes a low battery indicator,
a power-good indicator and two charge status
indicators that allows for outputs with LEDs or
communication with host microcontrollers. The
MCP73871 device is fully specified over the ambient
temperature range of -40¡ãC to +85¡ãC.
Package Included:
1 x MCP73871 USB DC Solar Lipoly Lithium Lon Polymer Charger 3.7/4.2V Battery Module
Shipping Policy
Item Location
Payment Mathord
Returns Policy
About Feedback
Shipping Policy
1. We Ship to Worldwide
2. We ship your orders within 1-2 business days after the payment cleared.
3. Item shipped from China via china Post Airmail, reach most of the countries within 2 to 4 weeks.
4. Delivery time depends on destination and other factors, it may takes up to 20 days. If you don't receive
the item after 25 days,please keep in touch with us, we'll investigate and solve the delivery problem.
5. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges
are the buyer's responsibility. Please check with your country's customs office to determine what these
additional costs will be prior to bidding or buying.
Item Location
ShenZhen
Payment Mathord
1. We accept PAYPAL only.
2. Payment must be made within 7 days of auction closing (Unpaid dispute will automatically open when item
is not paid in 7 days).
3. PLEASE NOTE: SHIPPING&HANDING DOES NOT INCLUDE DUTIES, LOCATL TAXES OR ANY OTHER IMPORTATION FEES.
4. Please list your special requests (color, packages, value of declaration, etc.) in the EBAY NOTES SECTION
when you make payment
Returns Policy
1. Customer satisfaction is our top goal. All products are quality checked. They are new and in good
condition when shipped to our customers. If product is defective or damage upon arrival, or wrong
product shipped, please keep in touch with us immediately. Returns accepted within 14 days of delivery date
and item must be in original new condition, not worn or altered in any way with attached tags & wrap.
Otherwise deal is final. Return shipping must be paid by buyer.
2. Please keep in touch with us first if you have anyproblems/questions/concerns. We will be happy to resolve
any issues you may have in a cordial and friendly manner.
3. We appreciate your Positive Feedback, and will do the same in return. PLEASE DO NOT leave
negative feedback without first communication with us. Please allow max 24 HOURS for us to respond
About Feedback
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is
very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or
negative feedback, so that we can satisfactorily address your concerns.It is impossible to address
issues if we do not know about them!